Cracked or Damaged Casting Repair by Reynolds French

Recognized as the Leader
in repair of cracked or damaged castings.
We do field machining, alignment and
consultation for equipment problems,

Rich in experience----Eager to serve

Tulsa, OK, home of Reynolds French Equipment Repair
Providing outstanding service and products to  industry for over 60 years.
Contact us today!



Check out our Upcoming Seminars!
Reynolds French Grouting Seminars held semi-annually 

Looking for
Technical Bulletins?
 We have them.

 Did you know our employees have turned in a consistenly high Safety record?  Click here to see our Safety Certifications.

 Reynolds French can solve your equipment problems and save you money.
Got equipment problems you can't quite figure out?  We can help.  E-mail us with details.

Reynolds French Customer Comments

Reynolds French is extremely proud of its customer service, quality products and quality workmanship.  Because of this dedication, we have received numerous customer comments on our work, not only locally but from all parts of the world. Listed below are a few of these comments:


      "I wanted to let you know that we are very happy with the work done by Anthony. We will definitely keep you guys in mind for any future work that we may need. Thanks."


Dustin Trowbridge
Team Leader | Plant Team
Northern Natural Gas Company
Palmyra, NE


     "Kudos to Reynolds French for their innovation and willingness to do whatever was needed to complete the job.  All the guys on site deserve a pat on the back.  The press is up and running and, according to the guys that have been there since the press was installed, it has never run better."


Kaiser Aluminum - 01-15-16


     "We just got the Ruston running today after your repair on it. Took a long time to get turbo and charge air coolers from the UK.

      That area where you worked was solid as a rock and no leaks. We ran it for about 3 hours and it looked very good.

       I just wanted to let you know that you did a great job. Thanks my friend."


Jeff Baker
Power House Supervisor
Hecla Greens Creek Mine - 11--11-15 


     "Thank you to your company and all of your guys that helped with metal stitching our compressor case.  I was very impressed with the skill and determination they brought to the job.  I greatly appreciate everything they did in helping us get our unit back into operation.  Thanks again"


      Tyler Shane
Rotating Equipment Engineer
BP Cooper River Plant - 4-1-15


     "Just a quick note to say the report on the GMV Cooper that was line bored at the Keyera Strachan Gas Plant near Rocky Mountain House, Alberta has been and is running very well.  We never get enough good news so here is some."


Duane Donaldson
General Manager
LOK Energy Services Inc.  3-19-13


     "Firstly thanks to the both of you for helping me get things setup and in the works this weekend and on such short notice. I never could have pulled this repair off so quickly and smoothly without your help.

     I also want to mention a special thanks to your technicians Lawrence and Gary. They were personable, responsive, professional and most of all competent and hard working. I've been working in the power industry for almost 30 years now and right from the start after meeting and discussing this job with Lawrence and Gary, I was very confident that they had it under control and would get the job done and do it correctly. From a supervisory standpoint it is such a relief to have that level of confidence in people and their ability. These two gentlemen exemplify my experiences with Reynolds French, those being a CAN DO attitude and an extremely high level of quality and craftsmanship.

      And again this hasn't been my first experience with Reynolds French and because of the speed and success that I experienced fifteen years ago I knew calling you on this repair was the right decision. You can rest assured anytime I have a need of your services I will call on you again as well you can be assured that I will highly recommend Reynolds French anytime field machine work or weld repairs are required. Really there is none better in the business."


Rocky Cumming, Commisioning Engineer
General Compression, 2-1-12


     "As the Engineering Manager here in Tulsa I would also like to thank you for your excellent support when it was most needed.

     Please let your Team know how impressed we are with their dedication to meet a customer’s needs. It will be long remembered."


Aaron Madden Manager
Engineering Order Management
T.D. Williamson, 2-1-12


     "I appreciate your help with the broken bolt at the Oakland compressor station. The crew you sent did great work. They were very professional and left a lasting impression of the quality of work that Reynolds French can provide."


Kyle Bencker
Northern Natural Gas Company, 2-1-12


     "I wanted to pass along that I am pleased that they finished up a little early – as you expected – and seemed to do a really good job.  All our guys,  and I, were all impressed with the efficiency and job that R-F did. As you could see, we've got a lot of big, old machines and it is nice to know someone with some extreme capabilities.  Not that we want to have a breakdown anytime soon, but it is nice to have made the acquaintance with you guys and will not hesitate to call in the future."




     "I would like to pass on my appreciation of the work your fellows performed here. They were efficient, experienced and took a personal interest in providing a good service. They had a safe and professional attitude and worked well with everyone on the jobsite. We are very pleased with their work. Not to mention, they performed the work in shorter than estimated time. Please pass on my kudos to the boys as well as the boys superiors."

Brian MacFarlane
Shell Canada  2-12-10

     "I just wanted to say thanks to Gary and Lawrence, they were here yesterday and today making repairs to a TLA block. They did a great job for us and helped a couple hours after they were finished. I would also like to thank Russell for taking care of us on short notice."


 Jeff Shafer,
Supervisor Maintenance/Mechanical
Midwestern Gas Transmission
Guardian Pipeline   8-08-09


     "After maintenance on our Clark TCVD Engine, an attempt to start the unit with the Flywheel Lock engaged occurred. Although there was substantial damage to the lock, the flywheel remained in place. Since these were installed primarily to prevent incidental movement of the flywheel and not by outside forces, it greatly increased our confidence in this product."


Robert Jones
Unionville Storage
Centerpoint Energy 

       "I would like to take this opportunity to express my gratitude to your company employees, David Harris, Phillip Kay and Mark McManis for their extraordinary workmanship and dedication during the camshaft alignment on our Ingersoll Rand 512 KVR.  David's ingenious idea of using a mandril and bushings to accomplish the alignment turned a very tedious and problematic operation into a simple but very effective solution to cam alignment for this particular engine.  Mark, Phil and David are to be congratulated for their professional workmanship skills, attitude and dedication to make sure the job was performed to the utmost accuracy.  Their ideas, performance and professionalism were highly appreciate by myself and Southern California Gas Company."  
  ...Dennis K. McCorkle, Field Inspector
Southern California Gas Company
North Needles Compressor Station
        "Cliff Riffe has informed of the superior work you performed on our #10 unit last month in Mercer, Pennsylvania.  I understand you and Nick conformed to all safe working practices as required by company policy and that the work was performed efficiently so that downtime was kept to a minimum.  I also have been informed that you maintained a clean and organized work area throughout the job and did a good final clean up before leaving the site.  Finally, we appreciate that you and Nick required no extra supervising because of your knowledge of what needed done to return #10 to service.  This is especially helpful to us as we are still undergoing a transition process at our location."  
  ...R. E. Gropp, Operations Supervisor
Tennessee Gas Pipeline Company

     "David, I was told I had 4-5 days to repair 3 gearboxes starting on 10/29/07.The plant manager said "Don’t be the holdup". That's when I called you and scheduled this repair. You sent the right guys for the job, Phillip and Mark bored out the 3 gearboxes in record time. We got done by Wednesday (1-2 days ahead of schedule)!  Awesome, these guys are good. Next time I have a big problem, I am going to call you to solve it, knowing it will be done right and on time."


Monty  from Webco


     "On behalf of myself and Blue-Stream Services please accept a gift card for our appreciation on the recent job you did for us at Apache offshore platform Main Pass 289.  Due to your efforts, the gas compressor is on the line.  As a result of your efforts we now have time to regroup and get a plan of action for complete repairs and recover some revenue in the mean time.  I thank you for your prompt attention on short notice and your perseverance. Please call me if I may be of assistance to you in the future. Also enclosed is a second gift card that you may pass on to the assistant that accompanied you on this job."


Mark Ardoin, Service Manager
Blue-Stream Services 6-11-08




Reynolds French has a
We Work On Your Site or In Our Shop.

Click here to get
More Information


Technical Bulletins

Reynolds French Equipment Fixes

Reynolds French & Co.
12525 E. 60th St.
Tulsa, OK  74146
Phone:  918-252-7545
Fax:  918-252-7540

Web Design by
PRO Designs