PRODUCTS

GROUT

Epoxy, Grout and Resins for compressor, pump and engine, or other equipment installation, alignment and foundation repairs. We handle them all.

Grouts Available from Reynolds-French

Chockfast

The Chockfast range of high-performance epoxy grouting and chocking compounds provides precise and permanent alignment of all machinery, resistance to expansion under hot-running machinery and rapid curing with negligible shrinkage.

Chockfast products have an unmatched reputation for reliability with major gas pipelines, chemical, petrochemical and refining complexes, power plants, mining operations as well as industrial construction operations worldwide.

  • Increase equipment & foundation service life
  • Lower equipment operating cost
  • Lower maintenance cost

     

Available Chockfast Products:
Click the links below for technical sheets about each Chockfast product. 

Applications:

  • Skid-Mounted Equipment
  • Vessels / Tanks
  • Turbines
  • Pumps
  • Towers
  • Crane Rails
  • Turbocharger Skids
  • Shears / Presses
  • Various Industrial Equipment

Escoweld Grouting Products

Escoweld® is an engineered Epoxy Grout System for use with dynamically – operated industrial machinery and equipment where performance and operating reliability are crucial. Many considerations should be made when installing equipment. But one of the most significant considerations – the type of grout to use – is many times neglected. This can become a root cause of poor equipment performance and unpredictability.

The right grouting system, as part of a well – engineered equipment system, can provide years of cost-effective, reliable performance. Selecting the right grouting system is as simple as having an understanding about what the Escoweld® Epoxy Grout System providesEscoweld® Epoxy Grouts function as a critical interface between the equipment and its foundation ensuring proper transference of static and dynamic loads generated by operating equipment to the foundation. This allows the foundation to efficiently absorb and dissipate the loads true to its purpose

Escoweld Grouting Applications
Escoweld® Epoxy Grouts provide proper support for the operating equipment. When coupled with a properly designed anchoring system, Escoweld maintains critical shaft alignment fundamental for optimum performance of rotating and reciprocating equipment.

Escoweld Deep Pour System
Escoweld® Epoxy Grouts offer improved resistance to many industrial chemicals that would typically destroy conventional cement grouts. A foundation too, is subject to chemical attack. If the foundation mass is reduced by chemical attack, so is its effectiveness as a support and damping mechanism. Using guidelines available from ITW Philadelphia Resins, Escoweld can also be used to protect concrete foundations from chemical attack that would otherwise deteriorate as a result.

Escoweld® Epoxy Grouts contribute higher damping qualities than cement grouts. This is vital in assisting to maintain lower vibration levels in rotating equipment.

Cement Grout

Under many circumstances, foundation related work does not require the physical properties exhibited by epoxy grouting materials. When this occurs, a high performance, non-shrinking cement grout should be used to achieve excellent results.

Reynolds French is a Stocking Distributor of two such cement grouts.

FasTrac
FasTrac – is a precision made, ready to use, non-shrinking, non-metallic grouting compound for use in construction trades and plant maintenance. FasTrac expands at a controlled rate to take up for the volumetric voids created by water evaporating from the mix. This insures high strength and intimate contact with surrounding surfaces and its resultant load carrying ability. FasTrac is excellent for structural columns, bearing plates, anchor bolts, pre-stressed cables, patching holes, and foundation underpinnings.

FasTrac Technical Bulletin

ITW PRC 100
ITW PRC 100 – is a high performance, non-shrink, cement grout that meets or exceeds all requirements of the Corps of Engineers CRD C-621 and ASTM C-1107. It is designed for a wide range of consistencies from damp pack to high fluidity which meets the most demanding job conditions. It is recommended for grouting of anchor bolts, baseplates, structural steel and pre-cast columns, dowels, etc. which require non shrink, high tolerance, high strength performance. It is flowable for easy placement, adheres well to concrete or steel, and exhibits good impact and vibration characteristics.

ITW PRC 100 Technical Bulletin